Fig. 1: Characterization of FDP and CFDP. | Nature Communications

Fig. 1: Characterization of FDP and CFDP.

From: Room temperature nondestructive encapsulation via self-crosslinked fluorosilicone polymer enables damp heat-stable sustainable perovskite solar cells

Fig. 1

a The synthetic route of polymer gel CFDP. b Photographs of the fluorosilicone polymer before (FDP) and after (CFDP) the self-crosslinked process. c The light transmittance of ITO glass without and with the FDP and CFDP (thickness of 800 μm). The picture of polymer gel CFDP with a 15 mm-by-15 mm area on an ITO glass substrate is shown in the inset (indicated by orange dashed line). d The UV stability of FDP and CFDP. The UV stability test is shown schematically in the inset. e The water contact angles of the FDP and CFDP before and after exposure to water for 7 min. f The adhesion strength of FDP and CFDP. Inset is a schematic diagram of the bond strength test. g Thermogravimetric analysis (TGA) curves of FDP and CFDP. Source data are provided as a Source data file.

Back to article page