Author Correction: Limits to the strain engineering of layered square-planar nickelate thin films

1. Hanjong Paik

   Present address: School of Electrical and Computer Engineering, University of Oklahoma, Norman, OK, USA

2. These authors contributed equally: Dan Ferenc Segedin and Berit H. Goodge.

Authors and Affiliations

1. Department of Physics, Harvard University, Cambridge, MA, USA

   Dan Ferenc Segedin, Grace A. Pan, Qi Song, Spencer Doyle, Ari Turkiewicz, Charles M. Brooks & Julia A. Mundy

2. School of Applied and Engineering Physics, Cornell University, Ithaca, NY, USA

   Berit H. Goodge & Lena F. Kourkoutis

3. Kavli Institute at Cornell for Nanoscale Science, Cornell University, Ithaca, NY, USA

   Berit H. Goodge & Lena F. Kourkoutis

4. Department of Physics, Arizona State University, Tempe, AZ, USA

   Harrison LaBollita, Myung-Chul Jung & Antia S. Botana

5. The Rowland Institute, Harvard University, Cambridge, MA, USA

   Hesham El-Sherif & Ismail El Baggari

6. School of Engineering and Applied Science, Harvard University, Cambridge, MA, USA

   Nicole K. Taylor

7. Department of Chemistry and Chemical Biology, Harvard University, Cambridge, MA, USA

   Jarad A. Mason

8. Advanced Light Source, Lawrence Berkeley National Laboratory, Berkeley, CA, USA

   Alpha T. N’Diaye

9. Platform for the Accelerated Realization, Analysis, and Discovery of Interface Materials (PARADIM), Cornell University, Ithaca, NY, USA

   Hanjong Paik

Corresponding author

Correspondence to Julia A. Mundy.

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and permissions