Correction to: Scientific Reports https://doi.org/10.1038/s41598-024-56348-z, published online 22 May 2024
The Funding section in this Article was incomplete.
“This research was financially supported by the key R & D project of Guangxi Zhuang Autonomous Region (2021AB16016), the Science and Technology Plan Project of Liu Zhou City (2021AA0101B001), and the University Research Basic Ability Improvement Project of Guangxi Zhuang Autonomous Region (2020KY23018), and Guangxi Science and Technology Base and Talent Project (2022AC20024).”
now reads:
“This research was financially supported by the key R & D project of Guangxi Zhuang Autonomous Region (2021AB16016), the Science and Technology Plan Project of Liu Zhou City (2021AA0101B001), and the University Research Basic Ability Improvement Project of Guangxi Zhuang Autonomous Region (2020KY23018), Guangxi Science and Technology Base and Talent Project (2022AC20024), and Guangxi Science and Technology Normal University Key Laboratory project “Automotive Intelligent Manufacturing and Robotics Key Laboratory” (GXKSKYPT2021008).”
The original Article has been corrected.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Zhuang, Z., Lu, W., Zeng, L. et al. Author Correction: Welding-induced corrosion and protective measures for clad rebars in neutral chloride environments. Sci Rep 14, 15814 (2024). https://doi.org/10.1038/s41598-024-66137-3
Published:
DOI: https://doi.org/10.1038/s41598-024-66137-3
